Papers Published in Journals Indexed in Web of Science
Ozdemir, T*., Ekici, O., Koksal, M.,
Numerical and Experimental Investigation of the Electrical and Thermal
Behaviors of the Li-ion Batteries under Normal and Abuse Operating
Conditions, Journal of Energy Storage, v. 77, 109880,
2024.
https://doi.org/10.1016/j.est.2023.109880
Dogan, N*., Koksal, M., Kulah, G., Axial Gas Mixing in Conical Spouted
Beds with High Density Particles, Particuology,
v.81, 45-57, 2023.
https://doi.org/10.1016/j.partic.2022.12.008
Ozdemir, T*., Amini, A., Ekici, O., Koksal, M., Experimental Assessment
of the Lumped Lithium Ion Battery Model at Different Operating Conditions, Heat Transfer Engineering, v. 43:3-5, 314-325, 2022.
https://doi.org/10.1080/01457632.2021.1874666
Dogan, N*., Koksal, M., Kulah, G., Gas Velocity Distributions in
Conical Spouted Beds with High Density Particles, The Canadian Journal of Chemical Engineering, v.99(2), 1607-1615,
2021.
https://doi.org/10.1002/cjce.24012
Amini, A., Ozdemir, T*., Ekici, O., Baslamisli, S.C., Koksal, M., A
Thermal Model for Li-Ion Batteries Operating Under Dynamic Conditions, Applied Thermal Engineering, v. 185, 116338,
2021.
https://doi.org/10.1016/j.applthermaleng.2020.116338
Akroot, A*., Ekici, O., Koksal, M., Process Modeling of an Automotive
PEM Fuel Cell System, International
Journal of Green Energy, v.16, no. 10, 778-788, 2019.
http://dx.doi.org/10.1080/15435075.2019.1641105
Savari, C*., Satudeh-Gharebagh, R., Kulah, G., Koksal, M., Mostoufi,
N., Detecting stability of conical spouted beds based on information entropy
theory, Powder Technology, v.343,
185-193, 2019.
https://doi.org/10.1016/j.powtec.2018.11.028
Yaman, O*., Kulah, G., Koksal, M., Surface-to-Bed Heat Transfer for
High Density Particles in Conical Spouted and Spout-Fluid Beds, Particuology, v. 42, 35-47, 2019.
https://doi.org/10.1016/j.partic.2018.03.013
Golshan, S*., Yaman, O*., Koksal, M., Kulah, G., Zarghami, R.,
Mostoufi, N., A New Correlation for Minimum Spouting Velocity for Conical
Spouted Beds Operating with High Density Particles, Experimental Thermal and Fluid Science, v. 96, p. 358–370, 2018.
https://doi.org/10.1016/j.expthermflusci.2018.03.027
Gumussu, E*., Ekici, O., Koksal, M., 3-D CFD Modeling and
Experimental Testing of Thermal Behavior of a Li-Ion Battery, Applied Thermal Engineering, v. 120, p.
484–495, 2017. http://doi.org/10.1016/j.applthermaleng.2017.04.017
Savari, C*., Kulah, G., Koksal, M.,
Sotudeh-Gharebagh, R., Zarghamia, R., Mostoufi, N., Monitoring of Liquid Sprayed Conical Spouted Beds by
Recurrence Plots, Powder Technology, vol.
316, p. 148-156, 2017.
http://dx.doi.org/10.1016/j.powtec.2016.12.075
Savari, C*., Kulah, G., Sotudeh-Gharebagh, R., Mostoufi, N., Koksal,
M., Early Detection of Agglomeration in Conical Spouted Beds using Recurrence
Plots, Industrial & Engineering
Chemistry Research, v.55 (26), p. 7179−7190, 2016.
https://doi.org/10.1021/acs.iecr.6b00687
Kulah, G., Sari, S*., Koksal, M., Particle Velocity, Solids Hold-Up
and Flux Distributions in Conical Spouted Beds Operating with Heavy
Particles, Industrial &
Engineering Chemistry Research, v.55, p. 3131-3138, 2016.
https://doi.org/10.1021/acs.iecr.5b04496
Kaya, E*., Koksal, M., Investigation of the Predicting Ability of
Single Phase Chemical Equilibrium Modeling Applied to CFB Coal Gasification, Journal of Energy Resources Technology,
Transactions of ASME, v. 138(3), 2016.
https://doi.org/10.1115/1.4032207
Senturk-Lule, S*., Colak, U., Koksal, M., Kulah, G., CFD
Simulations of Hydrodynamics of Conical Spouted Bed Nuclear Fuel Coaters,
Chemical Vapor Deposition, v.21, p.
122-132, 2015. (featured on the cover
page of the journal).
https://doi.org/10.1002/cvde.201407150
Mostoufi, N., Kulah, G., Koksal, M., Flow Structure
Characterization in Conical Spouted Beds Using Pressure Fluctuation
Signals, Powder Technology,
v.269, p. 392-400, 2015.
https://doi.org/10.1016/j.powtec.2014.09.028
Sari, S*., Kulah, G., and Koksal, M., Characterization of Gas-Solid
Flow in Conical Spouted Beds Operating with Heavy Particles, Experimental Thermal and Fluid Science,
v. 40, p. 132-139, 2012.
https://doi.org/10.1016/j.expthermflusci.2012.02.008
Suther, T*., Fung, A., Koksal, M., Zabihian, F., Effects
of Operating and Design Parameters on the Performance of a Solid Oxide Fuel
Cell-Gas Turbine System, International Journal of Energy Research, v. 35(7), p. 616–632,
2011.
https://doi.org/10.1002/er.1722
Koksal, M., Golriz, M., and Hamdullahpur, F., Effect of Staged Air on
Heat Transfer in Circulating Fluidized Beds, Applied
Thermal Engineering,
vol.28, 1008 - 1014, 2008.
https://doi.org/10.1016/j.applthermaleng.2007.06.028
Podila, K*., Al Taweel, A.M., Koksal, M., Troshko,
A., and Gupta, Y.P., CFD Simulation of Gas Liquid Contacting in Tubular Reactors, Chemical
Engineering Science, vol. 62, 7151 – 7162, 2007.
https://doi.org/10.1016/j.ces.2007.08.081
Rahman, M.A*., Mustafiz, S., Koksal, M., Islam,
M.R. Quantifying
the Skin Factor for Estimating the Completion Efficiency of Perforation Tunnels
in Petroleum Wells, Journal of Petroleum Science and Engineering, vol. 58, 99–110,
2007.
https://doi.org/10.1016/j.petrol.2006.11.012.
Rahman, M.A*., Mustafiz, S., Biazar, J., Koksal,
M., and Islam. M.R., Investigation of a Novel Perforation Technique in Petroleum Wells
- Perforation by Drilling, Journal of
the Franklin Institute, Engineering and Applied Mathematics, vol.344/5,
777-789, 2007.
https://doi.org/10.1016/j.jfranklin.2006.05.001
Zhang, D*., and Koksal, M., Heat Transfer in a Pulsed
Bubbling Fluidized Bed, Powder Technology,
vol. 168, 21-31, 2006.
https://doi.org/10.1016/j.powtec.2006.06.017
Hicken, J.E*., Ham, F.E., Militzer, J., and
Koksal, M.,A
Shift Transformation for Fully Conservative Methods: Turbulence Simulation on
Complex Unstructured Grids, Journal of
Computational Physics, vol. 208, p. 704-734, 2005.
https://doi.org/10.1016/j.jcp.2005.03.002.
Koksal, M., Golriz, M., and Hamdullahpur, F., Thermal Aspects in a
Circulating Fluidized Bed with Air Staging, International
Journal of Energy Research,
vol. 29(10), p. 923-935, 2005.
https://doi.org/10.1002/er.1121
Koksal, M., and Hamdullahpur, F., CFD Simulation of
Gas-Solid Flow in the Riser Section of a Circulating Fluidized Bed with
Secondary Air Injection, Chemical Engineering
Communications, vol.
192(9), 1151-1179, 2005.
https://doi.org/10.1080/009864490522713
Koksal, M., and Hamdullahpur, F., Gas Mixing in Circulating
Fluidized Beds with Secondary Air Injection, Chemical
Engineering Research&Design, vol. 82(A8), p. 979-992, 2004.
https://doi.org/10.1205/cerd.82.8.979.41546
Ersoy, L.E., Golriz, M.R., Koksal, M. and
Hamdullahpur, F., Circulating Fluidized Bed Hydrodynamics with Air Staging- An
Experimental Study, Powder Technology, vol.
145, p. 25-33, 2004. https://doi.org/10.1016/j.powtec.2004.05.008
Koksal, M., and Vural, H., Bubble Size Control in a
2-D Fluidized Bed Using Moving Double Plate Distributors, Powder Technology, vol. 95, no.3, p. 205-213, 1998.
https://doi.org/10.1016/S0032-5910(97)03337-8
Papers Published in Other Journals
Amini, A., Ozelci, B., Ozdemir, T*., Ekici, O., Baslamisli, S.C.,
Koksal, M., Experimental Study of the Performance of a Li-Ion Battery
in a Highway Driving Cycle, Kocaeli Journal of Science and Engineering
3 (1), 1-8, 2020.
https://doi.org/10.34088/kojose.668184
Alipour, A*., Koksal, M., Kulah, G., Zarghami, R., Mostoufi, N.,
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed
with a Draft Tube, Iranian Journal of Chemical Engineering (IJChE) 17
(3), 85-97, 2020.
https://dx.doi.org/10.22034/ijche.2021.127792
Letters to the Editor
Yaman, O*., Kulah, G., Koksal, M., Comment on “Deciphering Conical
Spouted Bed Hydrodynamics Using High Intensity Microphone”, Letter to the Editor
, Nuclear Engineering and Design, 110242,
2019.
https://doi.org/10.1016/j.nucengdes.2019.110242